CHIKYU Information Portal
CHIKYU HAKKEN
JAPANESE | SITE MAP | CONTACT IODP
EARTH DISCOVERY
HOME CHIKYU EXPEDITION CDEX VISITOR'S GUIDE
HOME > Expedition > NanTroSEIZE > NanTroSEIZE Exp. 319
Expedition
Expedition Information
IODP expedition target, schedule and onboard scientists
Data and Sample
Data and Sample acquired by Chikyu and IODP operation
Publication
Scientific/Engineering publications
Shipboard Laboratories
Chikyu shipboard laboratories, equipments
Logging Service
Chikyu logging service information
Chikyu Science Operation Policy
CDEX operation policies for the Chikyu Expedition
Apply to Sail
How to apply to Chikyu expedition
Core-Log-Seismic Integration
Study on Core-Log-Seismic data integration
Engineering Development
Engineering development, Long Term Borehole Monitoring System
IODP Nankai Trough Seismogenic Zone Experiment
Stage 2 Expedition 319 "Riser/Riserless Observatory 1"
| Overview | Drilling Plan | Scientific Prospectus | Expedition Scientists | Shipboard Science Party |
| CHIKYU Crew | Daily Report | Chikyu Report | Photo Gallery |
OVERVIEW
Expedition Number 319
Objective To prepare for future installation of the Long-Term Borehole Monitoring Systems (LTBMS) by Riser and Riserless drillings in the great earthquake and Tsunami-genic region of the Nankai accretionary prism.
Location Nankai Trough, Kumano-nada, Offshore Kii peninsula, Japan
Period From May 5 2009 to Aug.31
(Port Call) From May 5 2009 to May 9
(At Sea) From May 10 2009 to Aug.31
Drilling Vessel Chikyu
This expedition will prepare the boreholes at two sites to be used for future installations of the Long-Term Borehole Monitoring Systems. At the first site at the accretionary prism in the Kumano Basin (SiteNT2-11), riser drilling and casing operations will proceed down to approximately 1,600 m below seafloor. Coincident with the drilling, LWD/MWD (Logging While Drilling/Measuring While Drilling), wireline logging will be conducted in order to assess hole conditions and formation properties of the cover sediments of the Kumano Basin and the underlying accretionary prism. Additionally, spot coring and downhole measurements – at casing size changing locations – will be also operated.
At the second site, NT2-01J (near C0004), riser-less drilling and casing will proceed to 525 m, coincident with LWD. No coring or downhole measurements will be conducted from the riserless drilling site. Contingency drilling sites are NT1-01 (coring) and near C0002 (casing installatioin).
Drilling Plan

Map

Proposed Site Operation Lat/Long Water Depth Target Depth
(Below seafloor)
NT2-11 Riser Drilling, Casing,
Logging, Spot Coring
33°27’N, 136°32’E 2061m 1600m
NT2-01J Casing pipe installation 33°13’N, 136°47’E 2535m 525m
Contingency Site
C0002(NT3-01) Casing pipe installation 33°18’N, 136°38’E 1936m 1000m
NT1-01 Coring 32°45’N, 136°55’E 3610m 600m
Scientific Prospectus
Expedition 319 Scientific Prospectus
EXPEDITION SCIENTISTS
Co-Chiefs Scientists
Eiichiro Araki
Marine Technology Center / JAMSTEC
Tim Byrne
Connecticut University
Lisa McNeill
University of Southampton
Demian Saffer
Pennsylvania State University
Expedition Project Manager
Nobu Eguchi (CDEX)
Chief Expedition Project Manager
IODP Department
Center for Deep Earth Exploration, JAMSTEC
Kyoma Takahashi (CDEX)
IODP Department
Center for Deep Earth Exploration, JAMSTEC
Sean Toczko (CDEX)
IODP Department
Center for Deep Earth Exploration, JAMSTEC
Shipboard Science Party (IODP Expedition 319)
Daily Report
Chikyu Report
Photo Gallery
Back to the NanTroSEIZE Home>
Back to top of page
Copyright 2006 JAMSTEC. ALL RIGHTS RESEVED. JAMSTEC website CDEX website