******************************************************************************************************************* UH-CODAS POST-PROCESSED SHIPBOARD ADCP DATA COLLECTED BY THE R/V MIRAI DURING RESEARCH CRUISE CINDY LEG 1. THE PROCESSING USED SINGLE PING (ENR) DATA, TOGETHER WITH HEADING AND POSITION ANCILLARY DATA. FOLLOWING STANDARIZED CORRECTIONS TO THE REFORMED VMDAS ADCP DATA, A VISUAL EDITING WAS PERFORMED IN THE ENTIRE DATASET TO FLAG BAD DATA. ALL UH-CODAS SOFTWARE WERE OBTAINED FROM http://currents.soest.hawaii.edu/ Output files (ascii format): mr1107_sadcp_u.asc (eastward component of velocity) mr1107_sadcp_v.asc (northward component of velocity) 5 minute average data Format: Firt row: First column, dummy (set to 0.0), Subsequent columns, depth in meters Subsequent rows: First column, Decimal Day (i.e. 0:00 Jan 1, 2011 = 0) Subsequent columns, velocity component (m/s) at depths given in row 1 Absent data set to -99 PROCESSOR: Saulo Soares (saulo@hawaii.edu) BELOW ARE SOME DETAILS OF THE CODAS PROCESSING STEPS: --------------------------------------------------------------------------------------------------------------------- LAST CHANGED : 2012/09/12 04:12:08 CRUISE NAME(S) : mr1107L1_os75 CRUISE DATES : 2011/10/03 01:18:58 to 2011/09/27 13:08:23 SHIP NAME : Mirai PORTS : Singapore - Colombo Sri-Lanka CHIEF SCIENTIST : unspecified DATABASE NAME : aship DATA FILES : zzz2011_267_43663.raw to zzz2011_297_63603.raw STATUS : to do done ------ ----------- averaged [ x ] reformed vmdas! loaded [ x ] NOTE: time-dependent heading corrections applied IN the ensembles check heading correction [ x ] <= No heading correction device calibration [ x ] <= Applied transducer offsets, applied rotation cals after reducing ave windows edited [ x ] <= No scattering layers were removed. re-check heading correction [ x ] <= was required application of timslip_short again as nav/calib steps were redone after first 2 gautoedits check editing [ x ] <= light edits, steps2rerun were just apply_edit and matfiles figures [ x ] INSTRUMENT : os75 ACQUISITION : PROGRAM : uhdas PROCESSING: : python LOGGING : PARAMETERS : BT : bottom track mode (on or off) SI : sampling interval or averaging period for ensemble (sec) NB : number of bins BL : bin length (m) TD : transducer depth (m) BK : blanking length (m) HO : heading offset applied by DAS (deg) HB : heading bias (deg) CRPH : compensation for roll-pitch-heading, 1:on, 0:off) yy/mm/dd hh:mm:ss BT SI NB BL TD BK HO HB CRPH 2011/09/25 12:12:41 off 300 40 16 6 8 45.00 0.00 0001 2011/09/26 13:12:43 off 300 40 16 6 8 45.00 0.00 0001 2011/09/30 17:12:40 off 300 40 16 6 8 45.00 0.00 0001 2011/10/21 13:12:40 off 300 40 16 6 8 45.00 0.00 0001 2011/10/25 17:12:40 off 300 40 16 6 8 45.00 0.00 0001 HEADING : PRIMARY : N2R CORRECTION : no heading correction device POSITIONS : gps (specify more detail if available) CALIBRATION : check parameters for original heading alignment additional rotation 0.1 final transducer angle is: (original transducer angle) - (rotate_angle) 45 - (0.1) original scale factor 1 additional scale factor (none) COMMENTS : applied transducer offset: --xducer_dx -7 --xducer_dy 28 using os75bb_try01 as modifications (transduce offsets applied at every ping) used on os75bb_try02 did not had any effect. PROCESSOR : Saulo Soares (saulo@hawaii.edu) ======================================================= ####################################################### dbinfo.tx output bellow: # written 2012/09/11 18:00:02 # this file contains CODAS quick_adcp.py info #name, value pairs #-------------------- ## (determined from "sonar"): model = os ## (determined from "sonar"): frequency = 75 ## (determined from "sonar"): pingtype = bb ## (determined from "sonar"): instname = os75 ## ping_headcorr is True beamangle 30 configtype python cruisename mr1107L1_os75 datatype uhdas ens_len 300 fixfile None pgmin 50 proc_engine python ref_method refsm sonar os75bb yearbase 2011 ########################################################